LwCad for LightWave
LWCAD 5.5 ROAD LINE crashes on 2015.3 and 2018

LWCAD 5.5 ROAD LINE crashes on 2015.3 and 2018
not when using straight line tool, but when set to spline or curve mode.
Works with a straight line option.
Just started playing with cross walk and it crashed also when playing with sizing parameters.
Tried unistalling from 2015 and 2018. Reboot, then installed 2018 only..still crashed.
Tried installing 2015..same still crashes.
I am running Windows 10 Pro...if that helps.

Gary

LWCAD 5.5 ROAD LINE crashes on 2015.3 and 2018 not when using straight line tool, but when set to spline or curve mode. Works with a straight line option. Just started playing with cross walk and it crashed also when playing with sizing parameters. Tried unistalling from 2015 and 2018. Reboot, then installed 2018 only..still crashed. Tried installing 2015..same still crashes. I am running Windows 10 Pro...if that helps. Gary
edited Jan 12 at 7:19 pm

Please download LWCAD 5.51, reinstall, and try again.
If still problem. please let me know back.

Please download LWCAD 5.51, reinstall, and try again. If still problem. please let me know back.

Viktor Veličko, WTools3D founder

100
2
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft